logistic_guy
Senior Member
- Joined
- Apr 17, 2024
- Messages
- 1,370
No, it is irrelevant. The problem can be solved without S being there at all.Find \(\displaystyle m\overset{\large\frown}{QR}\).
View attachment 38960
my attempt
i can find \(\displaystyle m\measuredangle T\)
do this help to find \(\displaystyle m\overset{\large\frown}{QR}\)?![]()
Did it occur to you that [imath]m(\widehat{TQR})=180^o[/imath]?
No, it is irrelevant. The problem can be solved without S being there at all.
if i'm advance engineering and i can't solve this questionNever call a problem "very difficult"; people will probably end up laughing at you.
do you laugh at me?people will probably end up laughing at you.
i see the idea to draw a line from \(\displaystyle T\) to \(\displaystyle Q\)Just draw in another line -- one that is very relevant.
thank pkaDid it occur to you that [imath]m(\widehat{TQR})=180^o[/imath]?
Hence & therefore [imath]m(\widehat{TQ})+m(\widehat{QR})=m(\widehat{TQR})[/imath]!
It simply isn't at all difficult, if you know basic geometry.if i'm advance engineering and i can't solve this question
what's the flaw to call it very difficult?![]()
I avoid calling a problem very difficult myself, because I may well have missed something obvious. This is just general advice.do you laugh at me?![]()
My suggestion was to use the same basic idea you have already used, since you clearly know at least that much. Yes, TQ is a useful line to draw. if you know about angles in a circle (as you clearly do in part), then you should see an important fact about it.i see the idea to draw a line from T to Q
it give me triangle but i've no idea what kind of triangle is this and how to deal with it
if you mean i put a point outside the circle and do tricks by connecting the point with the circle like teacher Aion do last time
i don't see any idea there![]()
Do you recognize that TR is a diameter? That is the important fact. (pka's suggestion is simpler than mine.)the radius isn't horizontal to say the arc is \(\displaystyle 180^{\circ}\) and if i say what you say i've to proof it
i don't know how to do that![]()
Do you recognize that TR is a diameter? That is the important fact. (pka's suggestion is simpler than mine.)
thank Dr. for this idea. i see it before but can't see it's a right triangleYes.
Or you could draw in TQ as I suggested, and observe that triangle TQR, being inscribed in a semicircle, is a right triangle, so that angle QTR is 40 degrees, so arc QR is 80 degrees.
thank Dr. for this idea. i see it before but can't see it's a right triangle
thank Dr.