Question: Units (Water company preparing for possible drought.)

Andres75

New member
Joined
Sep 2, 2017
Messages
1
A water company wants to check that it will have sufficient water if there is a prolonged drought in the area. The region it covers is 500 square miles and various different offices have sent in the following consumption figures. There is sufficient information to calculate the amount of water available, but unfortunately it is in several different units.
Of the total area 100 000 acres are rural land and the rest urban. The density of the urban population is 50 per square kilometre. The average toilet cistern is sized 200mm by 15in by 0.3m and on average each person uses this 3 time per day. The density of the rural population is 5 per square mile. Baths are taken twice a week by each person with the average volume of water in the bath being 6 gallons. Local industry uses 1000 m3 per week. Other uses are estimated as 5 gallons per person per day. A US air base in the region has given water use figures of 50 US gallons per person per day.
The average rain fall in 1in per month (28 days). In the urban area all of this goes to the river while in the rural area 10% goes to the river 85% is lost (to the aquifer) and the rest goes to the one reservoir which supplies the region. This reservoir has an average surface area of 500 acres and is at a depth of 10 fathoms. 10% of this volume can be used in a month.
a) What is the total consumption of water per day?
b) If the reservoir was empty and no water could be taken from the river, would there be enough water if available if rain fall was only 10% of average?
 
A water company wants to check that it will have sufficient water if there is a prolonged drought in the area. The region it covers is 500 square miles and various different offices have sent in the following consumption figures. There is sufficient information to calculate the amount of water available, but unfortunately it is in several different units.
Of the total area 100 000 acres are rural land and the rest urban. The density of the urban population is 50 per square kilometre. The average toilet cistern is sized 200mm by 15in by 0.3m and on average each person uses this 3 time per day. The density of the rural population is 5 per square mile. Baths are taken twice a week by each person with the average volume of water in the bath being 6 gallons. Local industry uses 1000 m3 per week. Other uses are estimated as 5 gallons per person per day. A US air base in the region has given water use figures of 50 US gallons per person per day.
The average rain fall in 1in per month (28 days). In the urban area all of this goes to the river while in the rural area 10% goes to the river 85% is lost (to the aquifer) and the rest goes to the one reservoir which supplies the region. This reservoir has an average surface area of 500 acres and is at a depth of 10 fathoms. 10% of this volume can be used in a month.
a) What is the total consumption of water per day?
b) If the reservoir was empty and no water could be taken from the river, would there be enough water if available if rain fall was only 10% of average?
What are your thoughts?

Please share your work with us ...even if you know it is wrong.

If you are stuck at the beginning tell us and we'll start with the definitions.

You need to read the rules of this forum. Please read the post titled "Read before Posting" at the following URL:

http://www.freemathhelp.com/forum/announcement.php?f=33
 
a) What is the total consumption of water per day?
They have not specified any particular unit, for the volume of water consumed, so you are free to choose. Start by converting all given water-volume units, to match whatever unit you decide to report for part (a).

They have also provided land-area measurements in various units. Convert all of those to the same units, also.

Same goes for the linear measurements and any other given units. Convert to a common unit, for each type.


I have some questions, about water consumption at the US air base.

The density of the urban population is 50 per square kilometres …

The density of the rural population is 5 per square mile …

A US air base in the region has given water use figures of 50 US gallons per person per day.
If they have not provided the number of persons consuming water at the air base, then we would need to use the given density rates, to figure that out.

Is the air base located in a rural area or an urban area?

How much area does the air base cover?
 
Top